MarCum Lithium 12V 10AH LiFePO4 “Brute” Battery and 3amp Charger Kit

$99.99

Leave the weight behind this winter with the MarCum Brute 12V10AM Lithium LiFePO4 battery.  With half the weight and twice the run-time, MarCum’s Brute shaves pounds while improving performance.  In the past, increased run-time went hand-in-hand with heavier batteries.  With the Brute, you get featherweight technology that does not sacrifice performance.  Spend more time fishing, and less energy lifting.  The MarCum Brute sports a form-factor that provides a direct replacement for any system previously equipped with a 12V7/8/9 AH sealed lead-acid battery.  The other advantage that Lithium LiFePO4 offers is a significantly longer lifespan (2,000 full charge cycles), making it a more affordable alternative to lead-acid batteries over its lifetime.  The MarCum Brute is also equipped with a BMS circuit that protects the battery from overcharge, over dis-charge, and short circuiting.  The performance doesn’t stop there, as the MarCum Brute kit is equipped with a multi-stage charger for fast initial charge, reduced-charge near full, and a maintain charge cycle to prevent overcharging.  The MarCum Brute kit comes complete with battery, 3 AH charger, and fused charging cable.  As an angler, you rely on these power options to fuel your passion for the sport.  You can trust MarCum as all of our Lithium and LiFeP04 products are tested and certified to an international quality and safety standard.

  • Lithium LiFePO4 12V10amp battery and 3 AH charger
  • Half the weight, twice the run-time
  • 2 lbs. 11 oz.
  • Complete Lithium Re-Power Kit – Direct replacement to all electronics operated by 12volt 7/8/9 amp hour SLA Sealed Lead Acid batteries
  • Same battery footprint – fits existing electronics and shuttles
  • LiFePO4 is the optimal lithium chemistry for cold-weather performance
  • On-board BMS Circuit for battery management protection
  • Offers 2,000 full charge cycles
  • Multi-stage charge types include fast, reduced-charge, and maintain cycles
  • Safety Tested and Certified to UL 62133 standards

In stock

SKU: 857224002941.

Battery features & Specifications

MODEL NO. LP41210KIT
BATTERY TYPE Lithium Iron Phosphate (LiFePo4)
VOLTAGE 12.8 Vd.c.
AMP. HOURS 10 AH
WATT-HOURS 128
MAX CHARGE CURRENT 10-amps
PEAK DISCHARGE 10-amps
TERMINALS Standard F2 Spade Terminals (6.4mm or 0.25” wide)
LIFECYCLES 2000 Full charge cycles
OPERATING TEMPERATURE -20°C to +60°C
BMS PROTECTION

Circuitry designed to prevent the battery from operating outside its safe operating levels. Includes: over-current & over-voltage protection, regulates operation during high & low temperatures, balanced charging, and short circuit protection.

Weights & Dims

PHYSICAL DIMENSIONS  5-7/8″ x 2-1/2″ x 3-5/8″
WEIGHT  2 lbs. 11oz.
BATTERY Rechargeable 12-volt 10-amp Lithium LiFePo4 Battery
CHARGER 3-amp Hour Rapid-Charge Battery Charger
WIRING HARNESS Wiring Harness with 3-amp Fuse Protection
BATTERY WARRANTY Warranted against manufacturer defects for 2,000 charge cycles to 80% full capacity with product registration.
CHARGER WARRANTY One Year Charging System Warranty

BMS Protection

Circuitry designed to prevent the battery from operating outside its safe operating levels. Includes: over-current & over-voltage protection, regulates operation during high & low temperatures, balanced charging, and short circuit protection.

Warnings

  • Do not immerse the battery in water or sea water. Keep the battery in a cool dry place when not in use.
  • Do not use or leave the battery near a heat source (i.e. heater, furnace, fire).
  • Use the battery charger only as directed when recharging.
  • Do not reverse the positive and negative terminals on the battery connections.
  • Do not discard the battery in a fire, furnace, or other combustible space.
  • Do not connect the battery directly to an electrical outlet.
  • Do not short –circuit the battery by directly connecting the positive and negative terminals with metal objects.
  • Do not directly solder the battery or pierce the battery with a nail or other sharp objects.
  • If the battery gives off an odor, generates heat, becomes discolored or in any way appears abnormal during use, or while charging or discharging, immediately stop using it.
  • If the battery leaks and the battery contents (electrolyte) gets into an eye, do not rub the eye. Instead, flush the eye(s) with clean water and immediately seek medical attention or it may result in injury to the eye(s).
  • Do not use the battery in a location where static electricity or magnetic fields are great or it may result in damage to the battery safety devices.
  • Do not leave the battery in high temperatures (i.e. in direct sunlight or in a vehicle in extremely hot weather) or it may overheat, and its performance will be degraded, and service life decreased.
  • Tape the battery terminals prior to disposal to insulate them as discarded batteries may cause fire or explosion.
  • Follow manufacturers instructions.

Why the LX-7 Lithium Combo Will Change the Way You Fish w/ 330 Maniac

Scott Mackner, known by his handle 330 Maniac, is an avid fisherman and content creator from Minnesota. He is known for his fishing and trapping videos, his knowledgeable skill set and his ability to chase down a multitude of species.
He recently sat down with us to discuss why he made the switch to MarCum. From target separation to customizable zoom, Scott breaks down the top 5 reasons he chooses the LX-7 Combo over anything else.

AVERAGE RUNTIMES
WITH SPECIFIC MODELS

model
power draw
estimated runtime
M1 0.23A 43 hours
M3 0.20A 50 hours
M5 0.28A 36 hours
LX-6s 0.37A 27 hours
LX-7 0.55A 18 hours
LX-9 0.78A 13 hours
MX-7gps 0.33A 30 hours
VS485c 0.38A 26 hours
Mission SD 0.30A 33 hours
Quest HD 0.88A 11 hours
model
power draw
estimated runtime
Ice 35 0.21A 48 hours
Ice 45 0.25A 40 hours
Ice 55 0.30A 33 hours
Piranha MAX 4/4DI 0.18A 56 hours
Helix 5   (ALL Models) 0.65A 17 hours
Helix 7   (ALL Models) 0.80A 12 hours
Helix 8   (ALL Models) 1.00A 10 hours
Helix 12 (ALL Models) 1.75A 6 hours
Solix 10 (ALL Models) 2.40A 4 hours
Solix 12 (ALL Models) 2.88A 3 hours
Solix 15 (ALL Models) 4.56A 2 hours

*Power Draw collected from Humminbird® website: https://humminbird.johnsonoutdoors.com.

model
power draw
estimated runtime
Striker 1.00A 10 hours
Striker Plus 1.50A 7 hours
echoMAP 50s/dv 2.25A 4 hours
echoMAP 70s/dv 2.25A 4 hours
EchoMAP CHIRP 4x 0.41A 24 hours
EchoMAP CHIRP 5x 0.59A 17 hours
EchoMAP CHIRP 6x 1.41A 7 hours
EchoMAP CHIRP 7x 1.67A 6 hours
ECHOMAP Plus 4x 0.41A 24 hours
ECHOMAP Plus 6x 1.00A 10 hours
ECHOMAP Plus 7x 1.25A 8 hours
ECHOMAP Plus 9x 1.50A 7 hours
ECHOMAP Ultra 10x 2.16A 5 hours
ECHOMAP Ultra 12x 2.16A 5 hours
ECHOMAP UHD 6x 1.00A 10 hours
ECHOMAP UHD 7x 1.25A 8 hours
ECHOMAP UHD 9x 1.50A 7 hours
Livescope GLS10 4.83A 2 hours

*Max Amp Draw collected from Garmin® website: https://support.garmin.com and Manuals. Panoptix LiveScope GLS 10 Sonar Module listed as 58W max.; with a 12 volt dc power source, this equates to 4.83A.

model
power draw
estimated runtime
FL-8SE 0.25A 40 hours
FLX-12 0.24A 42 hours
FL-18 0.20A 50 hours
FLX-20 0.22A 45 hours
FLX-28 0.26A 38 hours
FLX-30BB 0.30A 33 hours

*Power Draw collected from Vexilar® website: https://vexilar.com.

model
power draw
estimated runtime
Hook 5 0.90A 11 hours
Hook 7 1.25A 8 hours
Hook 9 1.50A 7 hours
Elite-7Ti2 0.90A 11 hours
Elite-9Ti2 0.90A 11 hours
Elite-12Ti2 1.90A 5 hours
HDS-7 1.70A 6 hours
HDS-9 2.00A 5 hours
HDS-12 2.30A 4 hours
HDS-16 3.00A 3 hours

*Power Draw collected from Lowrance® website: https://lowrance.com/.

model
power draw
estimated runtime
715c 0.70A 14 hours
HD7i Gen2 1.00A 10 hours
HD7i Pro Gen2 1.20A 8 hours
HD10i Gen2 1.50A 7 hours
HD10i Pro Gen2 1.50A 7 hours

*Power Draw calculated from dividing the battery amp hours (dependent by model) by estimated runtimes provided  from Aqua Vu® website: https://aquavu.com.

*Runtime estimates are based on manufacturer represented power usage with factory default settings. Changes in user settings like screen brightness may impact power draw and therefore runtimes. As MarCum is not affiliated with the other companies listed, please contact the individual manufacturer for any further information. MarCum calculates runtimes based on amperage of the battery divided by the power draw of the model number. MarCum will update power draw information as provided by manufacturer. MarCum Technologies offers these estimates to aid in determining the size battery you need to meet your use case.

Battery features & Specifications

MODEL NO. LP41210KIT
BATTERY TYPE Lithium Iron Phosphate (LiFePo4)
VOLTAGE 12.8 Vd.c.
AMP. HOURS 10 AH
WATT-HOURS 128
MAX CHARGE CURRENT 10-amps
PEAK DISCHARGE 10-amps
TERMINALS Standard F2 Spade Terminals (6.4mm or 0.25” wide)
LIFECYCLES 2000 Full charge cycles
OPERATING TEMPERATURE -20°C to +60°C
BMS PROTECTION

Circuitry designed to prevent the battery from operating outside its safe operating levels. Includes: over-current & over-voltage protection, regulates operation during high & low temperatures, balanced charging, and short circuit protection.

Weights & Dims

PHYSICAL DIMENSIONS  5-7/8″ x 2-1/2″ x 3-5/8″
WEIGHT  2 lbs. 11oz.
BATTERY Rechargeable 12-volt 10-amp Lithium LiFePo4 Battery
CHARGER 3-amp Hour Rapid-Charge Battery Charger
WIRING HARNESS Wiring Harness with 3-amp Fuse Protection
BATTERY WARRANTY Warranted against manufacturer defects for 2,000 charge cycles to 80% full capacity with product registration.
CHARGER WARRANTY One Year Charging System Warranty

BMS Protection

Circuitry designed to prevent the battery from operating outside its safe operating levels. Includes: over-current & over-voltage protection, regulates operation during high & low temperatures, balanced charging, and short circuit protection.

Warnings

  • Do not immerse the battery in water or sea water. Keep the battery in a cool dry place when not in use.
  • Do not use or leave the battery near a heat source (i.e. heater, furnace, fire).
  • Use the battery charger only as directed when recharging.
  • Do not reverse the positive and negative terminals on the battery connections.
  • Do not discard the battery in a fire, furnace, or other combustible space.
  • Do not connect the battery directly to an electrical outlet.
  • Do not short –circuit the battery by directly connecting the positive and negative terminals with metal objects.
  • Do not directly solder the battery or pierce the battery with a nail or other sharp objects.
  • If the battery gives off an odor, generates heat, becomes discolored or in any way appears abnormal during use, or while charging or discharging, immediately stop using it.
  • If the battery leaks and the battery contents (electrolyte) gets into an eye, do not rub the eye. Instead, flush the eye(s) with clean water and immediately seek medical attention or it may result in injury to the eye(s).
  • Do not use the battery in a location where static electricity or magnetic fields are great or it may result in damage to the battery safety devices.
  • Do not leave the battery in high temperatures (i.e. in direct sunlight or in a vehicle in extremely hot weather) or it may overheat, and its performance will be degraded, and service life decreased.
  • Tape the battery terminals prior to disposal to insulate them as discarded batteries may cause fire or explosion.
  • Follow manufacturers instructions.

Why the LX-7 Lithium Combo Will Change the Way You Fish w/ 330 Maniac

Scott Mackner, known by his handle 330 Maniac, is an avid fisherman and content creator from Minnesota. He is known for his fishing and trapping videos, his knowledgeable skill set and his ability to chase down a multitude of species.
He recently sat down with us to discuss why he made the switch to MarCum. From target separation to customizable zoom, Scott breaks down the top 5 reasons he chooses the LX-7 Combo over anything else.

AVERAGE RUNTIMES
WITH SPECIFIC MODELS

model
power draw
estimated runtime
M1 0.23A 43 hours
M3 0.20A 50 hours
M5 0.28A 36 hours
LX-6s 0.37A 27 hours
LX-7 0.55A 18 hours
LX-9 0.78A 13 hours
MX-7gps 0.33A 30 hours
VS485c 0.38A 26 hours
Mission SD 0.30A 33 hours
Quest HD 0.88A 11 hours
model
power draw
estimated runtime
Ice 35 0.21A 48 hours
Ice 45 0.25A 40 hours
Ice 55 0.30A 33 hours
Piranha MAX 4/4DI 0.18A 56 hours
Helix 5   (ALL Models) 0.65A 17 hours
Helix 7   (ALL Models) 0.80A 12 hours
Helix 8   (ALL Models) 1.00A 10 hours
Helix 12 (ALL Models) 1.75A 6 hours
Solix 10 (ALL Models) 2.40A 4 hours
Solix 12 (ALL Models) 2.88A 3 hours
Solix 15 (ALL Models) 4.56A 2 hours

*Power Draw collected from Humminbird® website: https://humminbird.johnsonoutdoors.com.

model
power draw
estimated runtime
Striker 1.00A 10 hours
Striker Plus 1.50A 7 hours
echoMAP 50s/dv 2.25A 4 hours
echoMAP 70s/dv 2.25A 4 hours
EchoMAP CHIRP 4x 0.41A 24 hours
EchoMAP CHIRP 5x 0.59A 17 hours
EchoMAP CHIRP 6x 1.41A 7 hours
EchoMAP CHIRP 7x 1.67A 6 hours
ECHOMAP Plus 4x 0.41A 24 hours
ECHOMAP Plus 6x 1.00A 10 hours
ECHOMAP Plus 7x 1.25A 8 hours
ECHOMAP Plus 9x 1.50A 7 hours
ECHOMAP Ultra 10x 2.16A 5 hours
ECHOMAP Ultra 12x 2.16A 5 hours
ECHOMAP UHD 6x 1.00A 10 hours
ECHOMAP UHD 7x 1.25A 8 hours
ECHOMAP UHD 9x 1.50A 7 hours
Livescope GLS10 4.83A 2 hours

*Max Amp Draw collected from Garmin® website: https://support.garmin.com and Manuals. Panoptix LiveScope GLS 10 Sonar Module listed as 58W max.; with a 12 volt dc power source, this equates to 4.83A.

model
power draw
estimated runtime
FL-8SE 0.25A 40 hours
FLX-12 0.24A 42 hours
FL-18 0.20A 50 hours
FLX-20 0.22A 45 hours
FLX-28 0.26A 38 hours
FLX-30BB 0.30A 33 hours

*Power Draw collected from Vexilar® website: https://vexilar.com.

model
power draw
estimated runtime
Hook 5 0.90A 11 hours
Hook 7 1.25A 8 hours
Hook 9 1.50A 7 hours
Elite-7Ti2 0.90A 11 hours
Elite-9Ti2 0.90A 11 hours
Elite-12Ti2 1.90A 5 hours
HDS-7 1.70A 6 hours
HDS-9 2.00A 5 hours
HDS-12 2.30A 4 hours
HDS-16 3.00A 3 hours

*Power Draw collected from Lowrance® website: https://lowrance.com/.

model
power draw
estimated runtime
715c 0.70A 14 hours
HD7i Gen2 1.00A 10 hours
HD7i Pro Gen2 1.20A 8 hours
HD10i Gen2 1.50A 7 hours
HD10i Pro Gen2 1.50A 7 hours

*Power Draw calculated from dividing the battery amp hours (dependent by model) by estimated runtimes provided  from Aqua Vu® website: https://aquavu.com.

*Runtime estimates are based on manufacturer represented power usage with factory default settings. Changes in user settings like screen brightness may impact power draw and therefore runtimes. As MarCum is not affiliated with the other companies listed, please contact the individual manufacturer for any further information. MarCum calculates runtimes based on amperage of the battery divided by the power draw of the model number. MarCum will update power draw information as provided by manufacturer. MarCum Technologies offers these estimates to aid in determining the size battery you need to meet your use case.