Internal Power Plug for LX & M-series Flashers

$9.99

Internal Power Cable LX, i-series and M-series Flashers.

Two Prong Power Connection

In stock

SKU: 10-1005-81139.
Sonar Comptability
M1 M1LI
M3 M3L
M3LI M5
M5L M5LI
LX-7 LX-7L
LX-7LI LX-9
LX-9L MX-7GPS
MX-7GPSLi
Legacy Sonar Compatability
VX-1i LX-2
LX-3 LX-3tc
LX-3tci LX-5
LX-5i LX-6
LX-6S

How to Replace the Internal Plug

Step 1: Put the flasher dial side down on a steady surface and remove the 8 screws on the back of the head unit.

Step 2: With the flasher still face down, carefully open the unit by grabbing near the red seal that wraps around the system.

Step 3: Locate the power power connector (red and black wire) on the motherboard.

Step 4: Remove the power connector by pulling up and away from the motherboard.

Step 5: Unscrew the power plug washer from the back of the housing.

Step 6: Remove the bad plug from the housing by pushing it towards the motherboard.

Step 7: Insert the new plug by plugging in the connector to the motherboard and putting it through the back housing open slot.

Step 8: Screw the washer back on to tighten the new plug to the back of the head unit.

Step 9: Close the unit and screw in the 8 screws on the back.